Home page
SPONSOR AD SPONSOR AD

Topic: Chrome Alloys vs Polished

in Forum: C3 General Discussion


Chrome Alloys vs Polished

Posted: 3/8/03 6:49pm Message 1 of 7
Former Member
Send PM
CHESTER, NY - USA
Joined: 11/11/2001
Posts: 13
Vette(s): 1982 Red Coupe
Before the 82 hits the road in the Spring, I'd like to upgrade to the optional aluminum wheels from the standard ralleys. I see that both Eckler's and Corvette America are now offering CHROMED Alloys. They look pretty sweet (at least form the pictures). But, they're expensive ($1350). Anybody have any experience with these wheels--or am I better off with the "stock" polished alloys at a lesser price (Bair's-$950). I'll replace the tires at the same time with Radial T/As. (Originally, I was going with Firestone SS20s--but the T/As are my form of protest--as I understand Bridgestone is dropping the Firestone name).
Whad'ya think?


SPONSOR AD:: (Our Sponsors help support C3VR)

Chrome Alloys vs Polished

Posted: 3/8/03 10:57pm Message 2 of 7
Profile Pic
Lifetime MemberLifetime Member
Moderator
Send PM
Burke, VT - USA
Joined: 1/23/2002
Posts: 7315
Vette(s):
SOLD - "The Toy" - '70 Convertible
SOLD - "The Beast" - '90 ZR-1 (#682)
SOLD - "Betty" - '28 Ford Model A Tudor
SOLD - "BLKBRRD" - '78 Pontiac Trans Am
"BLUBYU" - '04 Coupe
I prefer the polished wheels over the chromed ones. They just seem to have a bit more character to me. But check out the eBay auctions for Wheels/Tires. This is one of several listed currently: 1976-82 Corvette aluminum wheels rims.


Jim Olson 

"The Toys"...!!!  Save the Wave!

Where I've been in a Corvette...!!!

Chrome Alloys vs Polished

Posted: 3/10/03 10:26am Message 3 of 7
Former Member
Send PM
Harmony, RI - USA
Joined: 2/7/2003
Posts: 17
Vette(s): 1978 Corvette Indianapolis 500 Pace Car
Really dumb question...I was detailing the chrome on my '78 this weekend, using a good quality chrome polish. Can this same polish be used on the alloy wheels that came with my pace car?

Thanks,
Franc


Chrome Alloys vs Polished

Posted: 3/11/03 6:29pm Message 4 of 7
Former Member
Send PM
Joined: 1/31/2003
Posts: 3
Vette(s): 1973 Coupe, yellow with dark saddle leather, LS-4 454, auto, A/C, AM/FM Stereo, ps, pw, pb, tilt-tele, luggage rack
I have a '73 with standard rally wheels, but these alloys were first offered for '73 (but only 8 sets left the factory due to porosity problems & a subsequent recall). I've seen the polished ones and they look great when they're clean and polished. They also look cruddy when they're dull, worn and tarnished. I'd vote going with the chromed ones. They'll look great for years and polishing won't be necessary. Unless your car is an NCRS contender, chrome always looks more stunning than polished. I've added chrome GM Performance Parts valve covers on my '73 LS-4 454 and they look MUCH better than the original orange ones. If the chrome are only a little more than polished, it would be worth the extra bucks.

John Gordon 1973Stingray454 |thumb|


Chrome Alloys vs Polished

Posted: 3/11/03 6:51pm Message 5 of 7
Lifetime MemberLifetime Member
Send PM
Joined: 1/29/2002
Posts: 1049
 DADS8T2 said: Before the 82 hits the road in the Spring, I'd like to upgrade to the optional aluminum wheels from the standard ralleys. I see that both Eckler's and Corvette America are now offering CHROMED Alloys. They look pretty sweet (at least form the pictures). But, they're expensive ($1350). Anybody have any experience with these wheels--or am I better off with the "stock" polished alloys at a lesser price (Bair's-$950). I'll replace the tires at the same time with Radial T/As. (Originally, I was going with Firestone SS20s--but the T/As are my form of protest--as I understand Bridgestone is dropping the Firestone name).
Whad'ya think?
 

You can get a "weathered" set on Ebay real cheap and clean them up yourself. It is easy to do. I submitted a "how to" under the Tips & Tricks section under the header bar. Might want to go this route instead of spending $1100 on chrome alloys. Just my opinion |wink|


Chrome Alloys vs Polished

Posted: 3/11/03 9:06pm Message 6 of 7
Former Member
Send PM
Joined: 1/31/2003
Posts: 3
Vette(s): 1973 Coupe, yellow with dark saddle leather, LS-4 454, auto, A/C, AM/FM Stereo, ps, pw, pb, tilt-tele, luggage rack
I also wanted to tell you that I've had both the Firestone SS20s and (currently) the B.F. Goodrich Radial T/As. There's no contest; the B.F. Goodrich are MUCH better tires on my '73 big block! The Firestones rode very hard and I had a very tough time even getting them balanced. The Radial T/As ride much better and are quieter (and less expensive) then the SS20s. The Radial T/As are HIGHLY recommended!!!

John Gordon 1973Stingray454
CRVT454@aol.com |thumb|


Chrome Alloys vs Polished

Posted: 4/2/03 6:07pm Message 7 of 7
Former Member
Send PM
Dublin, CA - USA
Joined: 4/2/2003
Posts: 1
Vette(s): 1979 Was a 79 L48 - bored .30 over, restored
Polished definatly..


|IMG|http://www.stacyandtim.com/vetteonforum2.jpg /IMG|

in Forum: C3 General Discussion


SPONSOR AD: (Our Sponsors help support C3VR)