Home page
SPONSOR AD

Topic: how and were can I get a copy of the build sheet for my 1973

in Forum: C3 General Discussion


how and were can I get a copy of the build sheet for my 1973

Posted: 11/8/19 11:50am Message 1 of 12
Former Member
Send PM
Woodbury, CT - USA
Joined: 7/12/2018
Posts: 15
Vette(s): 1973 corvette 454 big block 4 speed

how and were can I get a copy of the build sheet for my 1973?



|UPDATED|11/8/2019 11:50:28 AM (AZT)|/UPDATED|



SPONSOR AD:: (Our Sponsors help support C3VR)

Re: how and were can I get a copy of the build sheet for my 1973

Posted: 9/28/18 3:28pm Message 2 of 12
Limited Member
Send PM
Overland Park, KS - USA
Joined: 7/9/2003
Posts: 914
Vette(s): 1973 Orange Metallic Coupe (orig owner), L82, 4 spd (WR), PS, (A/C & PW (I installed from wrecked 73)), leather, AM/FM Stereo, ran with '65 FI unit earlier & will again some day. 2023 Accelerate Yellow HTC Stingray
The only place I know to find a build sheet for Corvettes built at the St Louis plant is on top of the gas tank. But if the body has been removed by a prior owner, it may no longer be there. Edit: And welcome to the forum.

|UPDATED|9/28/2018 3:28:42 PM (AZT)|/UPDATED|



1973 L-82 4 spd

Re: how and were can I get a copy of the build sheet for my 1973

Posted: 9/28/18 3:47pm Message 3 of 12
Profile Pic
Standard Member
Send PM
Grapevine, TX - USA
Joined: 8/26/2006
Posts: 1525
Vette(s): 1972 LT-1 convertible with factory air. 2017 Black Rose Grand Sport convertible.
\/ \/ \/ Post down here  \/ \/ \/

Chevy doesn't have those records anymore.  Flood in a fizzies factory or some such.  It's either on the car, a previous owner has something, or the original dealer might have something.  You can find the original dealer by joining NCRS and use their service for  $40-50.



   

Re: how and were can I get a copy of the build sheet for my 1973

Posted: 10/30/19 12:19pm Message 4 of 12
Profile Pic
Limited Member
Send PM
Canada
Joined: 7/16/2007
Posts: 15
Vette(s): 1976 Stingray, blue, 4 spd., one owner (me)

Where is the tank build sheet?

I am the original owner of a '76 so it should be there.

Last time under it I did not see it.

Can you get at it without tank removal?

All the St. Louis build records were destroyed in a fire I understand.




Re: how and were can I get a copy of the build sheet for my 1973

Posted: 10/30/19 12:29pm Message 5 of 12
Profile Pic
Standard Member
Send PM
Grapevine, TX - USA
Joined: 8/26/2006
Posts: 1525
Vette(s): 1972 LT-1 convertible with factory air. 2017 Black Rose Grand Sport convertible.

I think it is on the top of the driver's side of the tank.  If you can take out that rubber seal from the filler neck to the body (rear deck) you might be able to see it with a flashlight.  In order to read or photo it, you'll have to pull the tank (or the body 😲).

Good luck.




   

Re: how and were can I get a copy of the build sheet for my 1973

Posted: 10/31/19 3:09am Message 6 of 12
Profile Pic
Limited Member
Send PM
Canada
Joined: 7/16/2007
Posts: 15
Vette(s): 1976 Stingray, blue, 4 spd., one owner (me)

It can stay for the next forty years.




Re: how and were can I get a copy of the build sheet for my 1973

Posted: 10/31/19 8:59am Message 7 of 12
Former Member
Send PM
Henderson, NV - USA
Joined: 5/3/2019
Posts: 1
Vette(s): 1973 Orange coupe L82 4 spd.

 




Re: how and were can I get a copy of the build sheet for my 1973

Posted: 10/31/19 9:18am Message 8 of 12
Lifetime MemberLifetime Member
Send PM
Equinunk, PA - USA
Joined: 10/31/2007
Posts: 2465
Vette(s): 1972 conv, 4-speed, 350, 200hp, numbers match, rally wheels, war bonnett yellow w/white top. good condition, nice driver.

Looks familiar.  Most of them are in the same condition. 




Re: how and were can I get a copy of the build sheet for my 1973

Posted: 10/31/19 11:35am Message 9 of 12
Profile Pic
Limited Member
Send PM
Canada
Joined: 7/16/2007
Posts: 15
Vette(s): 1976 Stingray, blue, 4 spd., one owner (me)

Thanks for the photo.  Now I really realize it is not worth the effort to retrieve it!




Re: how and were can I get a copy of the build sheet for my 1973

Posted: 10/31/19 1:28pm Message 10 of 12
Lifetime MemberLifetime Member
Send PM
Joined: 1/27/2003
Posts: 62
Vette(s): 1974 Stingray and 2004 Six-speed Convertible

There were typically several copies (7 according to National Corvette Restorers Society for the C3's) of the build sheet that followed the car through production. There was the one that most everybody knows about attached to the top of the gas tank usually on the passenger side. There were additional copies (typically only one additional) usually left in the car found in various places including strut mounts, in seats, under seats, under carpet, etc. The most commonly found duplicates other than those mentioned above have usually been located under the dash between the speedometer and tach. They have also been found behind the radio and under the passenger side dash. It is apparently Corvette's cruel attempt to send you on a treasure hunt! Good luck!🤣




in Forum: C3 General Discussion


SPONSOR AD: (Our Sponsors help support C3VR)