Home page
SPONSOR AD SPONSOR AD

Topic: I'm Locked Out!

in Forum: C3 General Discussion


I'm Locked Out!

Posted: 11/9/03 3:05pm Message 1 of 5
Former Member
Send PM
Edgewood, KY - USA
Joined: 10/26/2003
Posts: 339
Vette(s): 1981, Black/Black, Engine bumped to about 400HP.Ext/int mostly stock.
Today I brought home my late brother's 81 T-top to check it our for a few day, with plans to probably buy it from his widow. While checking it out, I inadvertently locked the doors, then shut the doors with the key in it. That is the only key we know of. The driver's door is fully latched. The passenger door is latched and cannot be re-opened, but it did not shut fully, so it is not totally flush with the body. Before I call a locksmith, any tips on how I can get back into my car?
Thanks!
|sad|


SPONSOR AD:: (Our Sponsors help support C3VR)

I'm Locked Out!

Posted: 11/9/03 4:03pm Message 2 of 5
Former Member
Send PM
Castle Rock, CO - USA
Joined: 4/21/2002
Posts: 179
Vette(s): 1973 T-Top 1993 Coupe
Our prayers to your family.

You can get a towing company to open it with a slim jim. Have them go in from the passenger side as the drivers side has the wiring for the alarm right in the area of the rod that they will pull on.

Good luck!!!

|wavey|

Alex


I'm Locked Out!

Posted: 11/10/03 2:25am Message 3 of 5
Profile Pic
Lifetime MemberLifetime Member
C3VR Founder
Send PM
Eagleville, PA - USA
Joined: 11/1/2001
Posts: 18595
Vette(s): Used to own a 1979 Corvette now owned by JB79
 alexnelsen said: You can get a towing company to open it with a slim jim. Have them go in from the passenger side as the drivers side has the wiring for the alarm right in the area of the rod that they will pull on. 


Agreed. Let us know what happens!


-Adam Wartell
NCM Lifetime Member #1222
Founder: C3 Vette Registry 
C4 Vette Registry, C6 Vette Registry

My first Vette, now owned by JB79:

I'm Locked Out!

Posted: 11/11/03 8:56am Message 4 of 5
Former Member
Send PM
Tulsa, OK - USA
Joined: 8/26/2003
Posts: 32
Vette(s): 69 SS427 Phase III "GT"(undocumented), '70 Phase III GT,(LS-7), '80 L-82,
Try to bend a rod or piece of flat metal and pop the t-top lever down and remove the top and then you can take the key and unlock the door. Slim jims do not work on a vette as there is a water gurard inside the door over the lock. These cars are very hard to get into with out the key. I have used a rag aroung a screwdriver to pop the top front of the window out and used a stiff yardstick to reach in and activate the lock. you may have to attach a wire hook to it to pull the lever out. on 72's I just push down on the inside lock and force it to rotate and it will open.

GOOD LUCK!!!


Larry Clain '70 Baldwin Motion Phase III "GT" Vette Tulsa OK.|COLOR=NAVY| |/COLOR||IMG|http://home.swbell.net/vette-65/MotionVette69_side.JPG|/IMG|

I'm Locked Out!

Posted: 11/12/03 1:17am Message 5 of 5
Former Member
Send PM
Edgewood, KY - USA
Joined: 10/26/2003
Posts: 339
Vette(s): 1981, Black/Black, Engine bumped to about 400HP.Ext/int mostly stock.
Thanks Pantera. I got in with your suggestion! If it helps anyone in the future, the access point was at the bottom rear of window. I guess age had shrunk the weatherstripping at the rear of the window enough that there is a little gap there. I bent a 1/4" steel rod into this shape:
____
|____

From the side, it looked like a flattened out "V". That allowed me to push the T-Top lever down and remove it.
Thanks again for the idea!


from the side
___ I fashions a that comes down the on the Age had left of the


in Forum: C3 General Discussion


SPONSOR AD: (Our Sponsors help support C3VR)