Home page
SPONSOR AD SPONSOR AD

Topic: spare tire question

in Forum: C3 General Discussion


spare tire question

Posted: 6/24/04 3:33pm Message 1 of 16
Former Member
Send PM
Miramar, FL - USA
Joined: 3/16/2004
Posts: 672
Vette(s): 1972 coupe/350 cid/mild cam/4 spd/20 ft. paint (looks perfect from 20 ft.), but it sure runs nice.
When I get done writing, I need to find a big enough rock to crawl under before my wife gets home from her shift at the hospital. I guess I meant well when I bought a 5th 255/60-15 as a spare to do 5 wheel rotations. I don't mind the snickering and yuk-yuks from you guys, as a matter of fact, I'd consider it an honor. But my wife, who happens to know absolutely nothing about cars, by sheer chance asks the $64,000 question: "Honey, do you think that wide a tire will fit in that little bitty compartment?". Can you imagine the barrage of I-told-you-so's? My question, guys...What size spare tire do ya'll have?

JR |withstupid|


SPONSOR AD:: (Our Sponsors help support C3VR)

spare tire question

Posted: 6/24/04 5:02pm Message 2 of 16
Profile Pic
Former Member
Send PM
Frederick, MD - USA
Joined: 9/8/2003
Posts: 3398
Vette(s): 1969 convertible L71 427/435 4-speed black interior
My '78 has the small emergency spare and my '69 has a full size tire to match the rest (P215/70R-15). The spare tire carrier is designed to fit whatever size full tire came on the car originally or any optional size available from the factory. Even the later cars that came with the emergency spare can carry a full-size tire.


spare tire question

Posted: 6/24/04 5:21pm Message 3 of 16
Profile Pic
Lifetime MemberLifetime Member
Send PM
Hot Springs, AR - USA
Joined: 4/24/2004
Posts: 3236
Vette(s): 69 Conv #'s match 427, TKO-600/.64, 3.36HD-Posi, HT, T/T, PS, PB, PW, SP, Leather, Comp XE264HR & Roller Rockers & Lifters, Air-Gap RPM intake, Holley St Av 770 VS, MSD 6AL+Dist+Blaster SS, K&N, Jet-Hot Hooker Side-Pipes, Steeroids, Al Rad, Spal Fans
you will need to loosen up the two front bolts on the carrier also loosen the rear one..

I reached to the nuts with my finger and loosened until the bolt end was flush with the top of the nut. I have 245/60's... you might need a little more.


spare tire question

Posted: 6/24/04 7:00pm Message 4 of 16
Former Member
Send PM
Miramar, FL - USA
Joined: 3/16/2004
Posts: 672
Vette(s): 1972 coupe/350 cid/mild cam/4 spd/20 ft. paint (looks perfect from 20 ft.), but it sure runs nice.
Thanks for the good advice. One more thing...making sure I measured right, is the backspacing on the stock Rallyes 3.75"?
Mine's a '72 and if I read the Kelsey-Hayes markings correctly, the spare was manufactured in 1970.

JR |saluteflag|

P.S. Gotta say it again, I don't know what I'd do without all you guys.From the bottom of my heart and my wallet, thank you.


spare tire question

Posted: 6/24/04 9:04pm Message 5 of 16
Profile Pic
Lifetime MemberLifetime Member
Moderator
Send PM
Burke, VT - USA
Joined: 1/23/2002
Posts: 7315
Vette(s):
SOLD - "The Toy" - '70 Convertible
SOLD - "The Beast" - '90 ZR-1 (#682)
SOLD - "Betty" - '28 Ford Model A Tudor
SOLD - "BLKBRRD" - '78 Pontiac Trans Am
"BLUBYU" - '04 Coupe
 jredding said: ... What size spare tire do ya'll have? ...  

Looks to be an original F70 Goodyear laying in there. I haven't had it on the road since taking ownership 4 years ago. Also haven't looked at the stamping of the wheel yet. Steel rallys all the way around.


Jim Olson 

"The Toys"...!!!  Save the Wave!

Where I've been in a Corvette...!!!

spare tire question

Posted: 6/25/04 2:46am Message 6 of 16
Former Member
Send PM
Miramar, FL - USA
Joined: 3/16/2004
Posts: 672
Vette(s): 1972 coupe/350 cid/mild cam/4 spd/20 ft. paint (looks perfect from 20 ft.), but it sure runs nice.
I guess the closest size to an F70-15 would be 215/70-15.
My best move is to buy a repro. wheel (Wheel Vintiques-$60+ at Summit) and use it for the spare.Thanks.

JR |saluteflag|


spare tire question

Posted: 6/25/04 5:20am Message 7 of 16
Gold MemberGold Member
Send PM
TOPTON, PA - USA
Joined: 5/5/2002
Posts: 313
Vette(s): 71 454 convertible, mulsanne blue,a/c, matching numbers, 48K miles
That is the correct size tire.


Tom
71 454/365 Mulsanne Blue Convertible


spare tire question

Posted: 6/25/04 8:48am Message 8 of 16
Profile Pic
Lifetime MemberLifetime Member
Moderator
Send PM
CUYAHOGA FALLS, OH - USA
Joined: 12/2/2003
Posts: 6424
Vette(s): 1975 C3 Red, T-Tops, Black Interior. All I need is time and money! Getting there!
According to a Tire Rack employee I spoke with the F70-15 is the equal to the 225/70-15. I thought this was correct. Not the 215. Are we both in error? Does any know of a conversion chart for these sizes? Charts for metric radials are common. But charts for letter size to metric seem rare.


spare tire question

Posted: 6/25/04 8:49am Message 9 of 16
Former Member
Send PM
Miramar, FL - USA
Joined: 3/16/2004
Posts: 672
Vette(s): 1972 coupe/350 cid/mild cam/4 spd/20 ft. paint (looks perfect from 20 ft.), but it sure runs nice.
 bcliff said: That is the correct size tire. 



Great....thanks.

JR |saluteflag|


spare tire question

Posted: 6/25/04 8:55am Message 10 of 16
Former Member
Send PM
Miramar, FL - USA
Joined: 3/16/2004
Posts: 672
Vette(s): 1972 coupe/350 cid/mild cam/4 spd/20 ft. paint (looks perfect from 20 ft.), but it sure runs nice.
Since this will be an "emergency tire", so to speak, I'm not gonna worry too much. Thanks, "Lifer Ken".

JR


in Forum: C3 General Discussion


SPONSOR AD: (Our Sponsors help support C3VR)