Topic: The Restoration Continues
in Forum: C3 General Discussion
Already a Member?
Click Here to Login
Not yet a Member?
Click Here to Register for Free!
Hi, gang:
I retired three weeks ago now I have time to crawl under the car and give myself an excuse to go see my chiropractor more often. 
I have the car in the shop to have the A-Arms powder coated, the ball joints replaced and the control arm bushings replaced too. Yes, I was too chicken to do the ball joints because I'm uncomfortable removing the coil springs. I just don't want my retirement to end early because a wayward spring smacks me in the head. Though honestly I've done many more complicated things than change these parts. Of course, the original ball joints are on the car... so some other poor slob gets to remove the rivets!
I've decided this car is not going to be a NCRS car. But I'll keep her as original looking as I can without being anal retentive about it. My philosophy? Treat her as I would have if I drove her and fixed her in the 70's. That means I'm not concerned about putting in ball joints with bolts rather than rivets. And the tranny case that had to be replaced because Bubba took a chisel to her to remove the shifter arm doesn't bother me either. Still... she looks like a very fine example of a '72 Corvette. Interior is original looking. Paint is Mille Miglia Red. Tires... though... are Cooper Cobras. Sigh...
Anyway. When preparing to take the car to the shop yesterday I decided to install new brake calipers (actually Chevy calipers that weren't used until 1973 or late '72). And I installed SS trailing arm brake lines. While I was at it, I painted the calipers satin black as were the originals and I cleaned and painted the undercarriage from the front part of the wheel well back to the rear end of the car. It's not perfect. I started this cleaning and painting job only a week ago. I worked many MANY hours and couldn't believe the amount of dirt and grease I had to remove. So not everything is perfectly restored, but I did as much as I could in only one week.
So... for your viewing pleasure... here are the before and after pics. I think that you'll agree that the transformation is pretty stunning if only partly done.
BEFORE
AFTER
SPONSOR AD:: (Our Sponsors help support C3VR)
Lifetime MemberLa Quinta, CA - USA
Joined: 3/19/2008
Posts: 53
Vette(s): 1968 convertible, small block, auto, pw, pb, ps, air, 3rd owner CA black plate
Looks great! You should be happy with that job!
Lifetime MemberAsh Fork, AZ - USA
Joined: 4/18/2007
Posts: 1058
Vette(s): 1981 Red Interior White exterior
Great work! If you get bored you can always come over and do mine!
Dave C..........My mantra: I can not be bought!! Long and short term leases available.
In the words of Zora Arkus-Duntov "Is your seat belt fastened? Alright, Let's go"
Yeah, I know, Shut up Dave.
Yeah, I know, Shut up Dave.
Lifetime Member #192
F4Gary said: What's wrong with Cooper Cobras?
I like em! Just not Firestone Wide Ovals. Smile...
Nice work! And it only took a week?! Wow!
2012101154624r.jpg)
Build Date: May 7, 1975. 383 w/267 RWHP/310 RWTQ
Case75 said:
Nice work! And it only took a week?! Wow!
Yes, just a week. But I still have to go from the differential forward. Then I'll go over it again to get better detail and hit the hidden and harder to reach places. But now a casual observer would think she looks pretty new.
Nice work on the cleanup detail. I'm retired too and have spent lots of hours cleaning, scraping, and painting. I bought my '73 as a project car and it's been just that. It seems that once I start to work on something on this car, it always leads to other things. It's been fun!
Enjoy,
John
BTW, congrats to your daughter!
1973 BB 4-Speed Coupe Project Car
2009 Z06 Mostly Stock
So true, John. When this latest saga started, I just wanted the ball joints and control arm bushings replaced. I didn't feel comfortable doing the ball joints so I farmed them out.
Now the list and price tag grew. A lot!
All new U-Joints. All bushings replaced. Right wheel bearings being replaced.
In the process of replacing the wheel bearings things went haywire. The mechanic has a tool used to press out the bearings in place. The bearings must have ceased since the bearings won't come out and the tool broke in the process. AND the caliper mount was bent. So I will probably be stuck buying a bearing assembly.
My gut told me to use a local shop that does this a lot and uses a big hydraulic press. But no...I let my friend do the job. Big mistake!
So what started out as a $600 job will probably hit $3,000. At least he let me clean and paint the undercarriage while it was on his lift!
|UPDATED|6/19/2014 7:59:26 AM (AZT)|/UPDATED|
Now the list and price tag grew. A lot!
All new U-Joints. All bushings replaced. Right wheel bearings being replaced.
In the process of replacing the wheel bearings things went haywire. The mechanic has a tool used to press out the bearings in place. The bearings must have ceased since the bearings won't come out and the tool broke in the process. AND the caliper mount was bent. So I will probably be stuck buying a bearing assembly.
My gut told me to use a local shop that does this a lot and uses a big hydraulic press. But no...I let my friend do the job. Big mistake!
So what started out as a $600 job will probably hit $3,000. At least he let me clean and paint the undercarriage while it was on his lift!
|UPDATED|6/19/2014 7:59:26 AM (AZT)|/UPDATED|
Lifetime MemberModerator
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 20229
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
dbarnesid said: In the process of replacing the wheel bearings things went haywire. The mechanic has a tool used to press out the bearings in place. The bearings must have ceased since the bearings won't come out and the tool broke in the process. AND the caliper mount was bent. So I will probably be stuck buying a bearing assembly.
OUCH!
Was it a "tool" like this one, Dave? 
While I've never used one, the design is prone to damaging the hub/carrier if the bearings are tight on the spindle. I would rather take the thing off the car and use a press. A hunnert years ago, the first rear bearing job I ever did on one of these things almost kilt me. I spent the better part of a day gettin that dang thing apart....with NO special tools, or press. Just a BIG hammer, and a LOT of heat(and not just a few choice werds of encouragement
)! Never again....off she comes for me. The detailing looks really nice, tho!
Joel Adams
C3VR Lifetime Member #56 
My Link 
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
in Forum: C3 General Discussion
SPONSOR AD: (Our Sponsors help support C3VR)