Home page
SPONSOR AD SPONSOR AD

Topic: Towing advice for my Vette

in Forum: C3 General Discussion


Towing advice for my Vette

Posted: 3/5/04 8:05pm Message 1 of 5
Former Member
Send PM
Joined: 11/21/2003
Posts: 6
Vette(s): 1970 Convertible 350/300hp Black
My car is currently being restored and hopefully it will be done this summer...

My cousin is actually doing the restoration for me and is a 10 hour drive away from where I am.

When it's time to bring it back to Montreal, I will tow it on an open trailer. I was wondering if anyone has advise as to the best way to cover it while towing.

Should I put a car cover on it or not? A few friends have mentionned that it may damage the paint because of the constant rubbing of the cover in the wind.

I was also wondering if the plastic that car makers put on cars before delivery would be a good idea.

Any advice would be appreciated...

Thanks.


1970 Ragtop |IMG|http://pages.infinit.net/vette70/corvbody006sm.jpg|/IMG| |URL|http://pages.infinit.net/vette70/mycar |/URL|
SPONSOR AD:: (Our Sponsors help support C3VR)

Towing advice for my Vette

Posted: 3/5/04 8:36pm Message 2 of 5
Profile Pic
Lifetime MemberLifetime Member
Moderator
Send PM
CUYAHOGA FALLS, OH - USA
Joined: 12/2/2003
Posts: 6424
Vette(s): 1975 C3 Red, T-Tops, Black Interior. All I need is time and money! Getting there!
I would not put a cover on paint to tow. The cover do flap and can damage the paint. You can put something in front of the car to prevent debris from hitting the car. A fine screen works well, it lets air pass and does not tend to rip away. The other method is a closed trailer.

Ken Styer


Towing advice for my Vette

Posted: 3/6/04 5:24am Message 3 of 5
Former Member
Send PM
MERTZTOWN, PA - USA
Joined: 1/11/2002
Posts: 89
Vette(s): 1970 Stingray Donnybrooke Green Deluxe interior 350/300
I do agree with not using a cover on an open trailer. I have an enclosed trailer and have been told not to use one in it because of the vibration. I have been to car shows where people have arrived with saran wrap on the front of there car to keep the bugs off. I am not sure about this. I never did it but maybe someone out there knows more about it. The one thing I would be afraid of is the paint coming off when you peel it off, especially with a new paint job.


Towing advice for my Vette

Posted: 3/6/04 7:48am Message 4 of 5
Former Member
Send PM
RIDGEFIELD, CT - USA
Joined: 6/27/2002
Posts: 262
Vette(s): '71 454 Coupe, Auto, Ontario Orange/Black
I was just happy to read that you're putting it on a flat bed. When I saw "tow" -- I thought you were using a traditional tow truck. |no-no|

I agree with the 2 comments above -- no cover is best. If your really concerned about sand & pebbles etc., wait until spring when the roads are a bit cleaner.


Towing advice for my Vette

Posted: 3/10/04 10:17pm Message 5 of 5
Lifetime MemberLifetime Member
Send PM
CHICAGO, IL - USA
Joined: 10/15/2002
Posts: 34
Vette(s): It's a 1976 L-48 auto Red with Firethorn and white delux interior, 68,000 miles. I have tried to restore it to NCRS specs and have recieved 1 Bronze 3 Silver, 1 Gold Spinner and Top Gun, Best C3 Vette at Chicago's Chevy/Vette Fest.
After watching the paint on my Father-in-laws Model T Touring just get rubbed away, without any mercy, I did just as he did, bought an enclosed trailer. It is the only way to go. When you arrive at your destination, your car is exactly the way you put it inside...CLEAN! If you have to use an open trailer, don't use a car cover of any kind. The smallest amount of air that gets under it will cause the dreaded rubbing. Maybe its possible to find an open trailer that has a front air dam, or "Wind Jammer" on it. If you have to rent a trailer, it might be worth the look to see if you can rent an enclosed trailer, or borrow one from a friend who has one. Or as a last resort, do what many owners do, Drive it and enjoy the ride! Good Luck either way.

G |thumb| |saluteflag|


in Forum: C3 General Discussion


SPONSOR AD: (Our Sponsors help support C3VR)