Thanks for the direction.

Like Ken says do the tire swap first.If that does not cure it,look for loose parts then have it alignment done.My too many years doing front end alignments I found the factory specs too wide a variation.I made cars 1/4 POS deg. left side 0 deg. right side Camber.Make Caster anywhere from 1.5 to 2.75 POS.Make sure Caster is the same at both wheels or it will also pull to one side. Hope the helps out.
Dave

Swapped the front tires. Still pulls slightly to the right, but I don't think as much as before.
Had to put it to bed for the winter.

I'll get the alignment and frontend checked in the spring.

Thanks for all the good advice.

Dave

|UPDATED|10/29/2004 7:04:43 PM (AZT)|/UPDATED|