Home page
SPONSOR AD SPONSOR AD

Topic: Brake Line install

in Forum: C3 Handling Components


Brake Line install

Posted: 10/17/15 5:38am Message 1 of 2
Profile Pic
Lifetime MemberLifetime Member
Send PM
Canada
Joined: 12/24/2013
Posts: 416
Vette(s): 1975 L48 Stingray 1992 LT1
I'm about to install new brake lines. Any tips or things I should know from all the experienced people out there.




SPONSOR AD:: (Our Sponsors help support C3VR)

Re: Brake Line install

Posted: 10/17/15 8:08am Message 2 of 2
Profile Pic
Lifetime MemberLifetime Member
Moderator
Send PM
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 20218
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/ Am-Fm/map light National/Regional/Chapter NCRS "Top Flight" #2-1985 Bright Red/Carmine Cp.L-98/auto Member: NCRS, NCRS Texas, Corvette Legends of Texas
Best tip I can give for that job is to let someone else do it for you....Dead  LOL


Be sure to tape off, or otherwise find some way to plug the ends of the lines, so no doo-doo can get inside while fitting them....#1 tip. Don't need any trash getting in the brake system.
The front lines aren't too bad...the rear ones are a royal pita. Body off is much better, but still kinda tedious. The rear line snakes thru the frame at the rear kick-up, which can create new cuss words. If you still have the old lines, you can get a pretty good visual of where they go, and how to get the new ones in there. Good Luck! Thumbs Up



Joel Adams
C3VR Lifetime Member #56    

My Link


(click for Texas-sized view!)
             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

in Forum: C3 Handling Components


SPONSOR AD: (Our Sponsors help support C3VR)