Home page

C3 Handling Components

Offset rear trailing arms (1/2)
 5/31/18 1:19pm
apesa63
Former Member

Send Private Message

Hillsboro, OR - USA

Vette(s):
1975 L48 4sp. Coupe... Rebuilt Motor


Joined: 7/20/2015
Posts: 49

Greetings, 
I am ordering parts to rebuild the front and rear suspension on my '75 4 speed coupe. I was looking at going with Offset trailing arms to get wider tires in the rear. 

Does anyone have experience using these and how wide a tire were you able to get under the car? If you have pics and actual wheel / tire sizing that would be awesome.

Thanks for reading / replying,
Regards,
Pat


______________
Daytona Yellow '75 350 Muncie 4 spd
'73 454 on the engine stand.


Our Sponsors help support C3VR
Sponsor Ad

Re: Offset rear trailing arms (2/2)
 6/1/18 10:45am
73shark
Standard Member
Send Private Message

Overland Park, KS - USA

Vette(s):
1973 Orange Metallic Coupe (orig owner), L82, 4 spd (WR), PS, (A/C & PW (I installed from wrecked 73)), leather, AM/FM Stereo, ran with '65 FI unit earlier & will again some day.


Joined: 7/9/2003
Posts: 585

If you get no responses here, you might try checking with the vendor that sells the offset trailing arms and see if they have any answers for you. Don't forget that after you put in the big block engine, you'll need to upgrade the front sway bar to the 1.125 and install a rear sway bar which I believe is about 3/4" diameter. The front springs will also require upgrading to the big block springs.

______________

1973 L-82 4 spd