Topic: steering box -excessive backlash -
in Forum: C3 Handling Components
Already a Member?
Click Here to Login
Not yet a Member?
Click Here to Register for Free!
Hi
brian (redborderreivers) Newcastle upon tyne , UK
thanks for all your help in the past , here i go with another request,
I think the steering box in my 79 L82 requires ajustment ,
I can turn the steering wheel quite a bit before the wheels move,
whats the best way to adjust the backlash on these units (pitman is that correct?)
you guys are the experts, looked at the manual but that just gives adjustments with the steering box on the bench,
can i adjust on the car an whats the best way.
thanks in advance , Brian
SPONSOR AD:: (Our Sponsors help support C3VR)

Moderator
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 20218
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
First, make sure the rag joint isn't what is causing the play. The rag joint is the component that connects the steering column to the gear box, under the hood. It is made of three pieces: The metal flange for the steering column, a rubber/belted flexible coupling, and the metal flange that fits on the steering gearbox. The rubber flex coupler is ripped in a lot of cases when you have excessive play in the steering wheel. I would make sure that is in good condition before attempting to mess the the back/lash adjustment on the steering box. That adjustment is pretty sensitive, and if you get it too tight, you could wipe out the gearbox quickly.

If you find that your rag joint is good, we'll post up the adjustment procedure for ya.

If you find that your rag joint is good, we'll post up the adjustment procedure for ya.

Joel Adams
C3VR Lifetime Member #56
My Link
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
Joel thanks ,
the rag joint /flexible joint is fine the play is in the box itself not anywhere else on the steering system- so yep if you have a procedure for adjustment that would be greatly apreciated
just found this thread with some good info on
any more info appreciated thanks
redborderreivers

Moderator
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 20218
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
Joel Adams
C3VR Lifetime Member #56
My Link
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
in Forum: C3 Handling Components
SPONSOR AD: (Our Sponsors help support C3VR)