Home page
SPONSOR AD SPONSOR AD

Topic: 1981 Front Speaker Replacement

in Forum: C3 Interior


1981 Front Speaker Replacement

Posted: 3/12/04 7:21pm Message 1 of 6
Former Member
Send PM
pineville, LA - USA
Joined: 2/26/2004
Posts: 46
Vette(s): 1981 silver over charcoal coupe
I need a little info from someone that done this before, Im wanting to upgrade my sound since it does not have the stock radio in it to start with but it looks like replacing the front speakers might be a real job?
Please tell me I dont have take th eentire dash out to do this......

Thanks Vettehead1963


|COLOR=SILVER| |/COLOR||B| |/B|
SPONSOR AD:: (Our Sponsors help support C3VR)

1981 Front Speaker Replacement

Posted: 3/12/04 8:27pm Message 2 of 6
Former Member
Send PM
rowland hts, CA - USA
Joined: 3/7/2004
Posts: 4
Vette(s): 1981 convertable
replacing the speakers is not a big job. lust lift off the grills. The grills have tabs on both the right and left side slide grill either way and lift out. speakers are under and are bolted from the top 4 screws. A right angle or short screw driver helps a lot not much room for a screw driver. remove connectors and replace with new speakers speakers are 4x6. 4x6 plate speakers work great.


1981 Front Speaker Replacement

Posted: 3/12/04 8:32pm Message 3 of 6
Former Member
Send PM
rowland hts, CA - USA
Joined: 3/7/2004
Posts: 4
Vette(s): 1981 convertable
sorry about the spelling was in a hurry. if you have any questions email me.


1981 Front Speaker Replacement

Posted: 3/12/04 9:45pm Message 4 of 6
Former Member
Send PM
pineville, LA - USA
Joined: 2/26/2004
Posts: 46
Vette(s): 1981 silver over charcoal coupe
Hey thanks for the info, I thought that they might come off that way, but have not really tried, I just saw an article the other day involving an older vette and he was having to take the whole freakin dash off and I was definatly dreading that.
So plate speakers work good huh, I was kinda wondering about that as well.
Thanks for the helpful advice...

Vettehead1963


|COLOR=SILVER| |/COLOR||B| |/B|

1981 Front Speaker Replacement

Posted: 3/24/04 5:20am Message 5 of 6
Former Member
Send PM
Williamson, NY - USA
Joined: 8/8/2003
Posts: 10
Vette(s): 1980 Coupe Silver on Claret.
Hey guys!
Let me know how your replacement goes, I'm looking to do the same!
Thanks. |laugh|


John's '80 |IMG|http://driftriders.tripod.com//sitebuildercontent/sitebuilderpictures/80vette.gif |/IMG|

1981 Front Speaker Replacement

Posted: 3/24/04 5:45am Message 6 of 6
Former Member
Send PM
Edgewood, KY - USA
Joined: 10/26/2003
Posts: 339
Vette(s): 1981, Black/Black, Engine bumped to about 400HP.Ext/int mostly stock.
Not all 4x6 speakers will fit. Be very careful of the magnet size. I ordered from Crutchfield. Speakers were labeled as "EZ Fit" which was supposed to mean bolt-in. In fact, I had to do some cutting of the inner plastic of the dash plus GRIND OFF THE CORNER OF THE MAGNET. It turned a 30 minute task into a 4 hour job - I was not happy! My conclusion: don't mail order. Either go to a place where they can do the install or remove your old speakers before hand and go to the store, where you can compare actual speaker size and maybe even sit a speaker into place before buying.


in Forum: C3 Interior


SPONSOR AD: (Our Sponsors help support C3VR)