Topic: Dash cover off and trying to get the original dash off!
in Forum: C3 Interior
Already a Member?
Click Here to Login
Not yet a Member?
Click Here to Register for Free!
Standard Member
Send PM
Joined: 12/3/2007
Posts: 292
Vette(s): 1978 Corvette Light Blue
Pulled from the swamps of Miami!
Its a driver and back on the road!
Ok got then heater core out not bad at all, the duct connected to it on the left was hard finding the third screw as it was in a wire holding loop that was bent down hiding the screw???
But now more questions hear is what mine looks like is this correct?????????????????
SPONSOR AD:: (Our Sponsors help support C3VR)
Now that the heater assembly is out, take some time and study all the levers and actuators. Clean and lubricate everything that moves. On mine, I found one of the actuator rods was nearly worn completely thru and ready to break off. Time well spent.
John
1973 BB 4-Speed Coupe Project Car
2009 Z06 Mostly Stock
Standard Member
Send PM
Joined: 12/3/2007
Posts: 292
Vette(s): 1978 Corvette Light Blue
Pulled from the swamps of Miami!
Its a driver and back on the road!
Ok the new heater core is in!!!!!!!!!!!!!!! Not that bad but the duct work back together was tight.
Now I started it up to check leaks and it looks good but cannot get the blower switch to work.
It was not working before I took the dash off but thought with everything out I coule d find the issue but I cannot. It had worked in the past.
The fuse looks good.
The relay has pwoer to it and its clicking?
There is power to the 4 positions switch but has 5 wires so how do I test that it has power where it needs to be.
So could it be the blower itself?
Stuck on this for now, checking the wiring diagram if anone has a imput I will take it, in troubleshooting?
in Forum: C3 Interior
SPONSOR AD: (Our Sponsors help support C3VR)