Home page
SPONSOR AD

Topic: Gas pedal

in Forum: C3 Interior

Gas pedal

Posted: 8/7/10 10:32am Message 1 of 4
Profile Pic
Former Member
Send PM
edgwood, MD - USA
Joined: 11/1/2007
Posts: 736
Vette(s): 1975 convertible,with the hard top and power streering.it a 350 L48 with auto trans. the color is light blue.
 The pin and spring on my 75 that holds the gas pedal on keep coming lose and falls out. I have both the pin and spring,am I missing a part that holds this assembly in?
                            Rick


SPONSOR AD:: (Our Sponsors help support C3VR)

Gas pedal

Posted: 8/7/10 11:00am Message 2 of 4
Profile Pic
Former Member
Send PM
Oak Creek, WI - USA
Joined: 5/21/2008
Posts: 1965
Vette(s): 1981 Great White Shark. Red Interior, 350/190 hp. PS, PB (SS), A/C CC, T-Tops. Served three years in Active Duty Army, then Retired Air Force after 34 years! Badger State Vettes Car Club. 175,000 Original miles!! Now own a 1998 C-5!
Yup, There is a little washer thingy that goes on the end of the shaft to hold it in place!!
Dan



Gas pedal

Posted: 8/7/10 11:55am Message 3 of 4
Profile Pic
Lifetime MemberLifetime Member
Send PM
Dorr, MI - USA
Joined: 8/21/2002
Posts: 2581
Vette(s): 71 Colonnade Hardtop Coupe Torch Red with black interior originally L48 built to push around 360hp
On mine its just the spring and the pin. Its suppose to be a tight fit, but when the plastic pedal hole gets worn out the pin falls out. I know its a PITAAngry  to get it back together. "T"


Gas pedal

Posted: 8/7/10 2:56pm Message 4 of 4
Profile Pic
Former Member
Send PM
edgwood, MD - USA
Joined: 11/1/2007
Posts: 736
Vette(s): 1975 convertible,with the hard top and power streering.it a 350 L48 with auto trans. the color is light blue.
I looked in the AIM manual ,but I couldn't find a picture to see if they used the clip on 75's.Dose anyone know when they started using them.
                  Rick



in Forum: C3 Interior


SPONSOR AD: (Our Sponsors help support C3VR)