Home page
SPONSOR AD

Topic: Kick panel removal

in Forum: C3 Interior


Kick panel removal

Posted: 11/16/22 5:49pm Message 1 of 3
Former Member
Send PM
Joined: 7/13/2019
Posts: 10

I need to replace the courtesy light door switch on my 69. To do that, I need to remove the kick panel to access the switch and wiring. I looked at it and I'm not sure, and I want to be careful so as to NOT crack the panel in removal.

Tips, tricks much appreciated!!




SPONSOR AD:: (Our Sponsors help support C3VR)

Re: Kick panel removal

Posted: 11/16/22 7:20pm Message 2 of 3
Profile Pic
Lifetime MemberLifetime Member
Moderator
Send PM
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 20214
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/ Am-Fm/map light National/Regional/Chapter NCRS "Top Flight" #2-1985 Bright Red/Carmine Cp.L-98/auto Member: NCRS, NCRS Texas, Corvette Legends of Texas

First remove the sill plate, or at least loosen all of the screws holding it down. There should be one screw in the kick panel, usually in a deep "hole", usually towards the top/front area of the panel. From there, it should just slip right off. If your car has manual vents(non-A/C car), you'll have to deal with the linkage for that...not sure, it's been maaany moons since I did an early car. 




Joel Adams
C3VR Lifetime Member #56    

My Link


(click for Texas-sized view!)
             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

Re: Kick panel removal

Posted: 11/17/22 8:44pm Message 3 of 3
Former Member
Send PM
Joined: 7/13/2019
Posts: 10

Thank you very much!! Just the info I needed! I truly appreciate your assistance and QUICK response! Terry




in Forum: C3 Interior


SPONSOR AD: (Our Sponsors help support C3VR)