Home page
SPONSOR AD SPONSOR AD

Topic: Need help removing rear speakers in '81

in Forum: C3 Interior


Need help removing rear speakers in '81

Posted: 11/16/03 12:56pm Message 1 of 3
Former Member
Send PM
Edgewood, KY - USA
Joined: 10/26/2003
Posts: 339
Vette(s): 1981, Black/Black, Engine bumped to about 400HP.Ext/int mostly stock.
I can't seem to find any screws that allow the rear speakers and their housings to be removed from my '81. I must be missing something. Can anyone help? I want to take the entire rear enclosures out and replace with boxes I will make to hold 6x9s.
Thanks!


SPONSOR AD:: (Our Sponsors help support C3VR)

Need help removing rear speakers in '81

Posted: 11/16/03 7:22pm Message 2 of 3
Former Member
Send PM
Edgewood, KY - USA
Joined: 10/26/2003
Posts: 339
Vette(s): 1981, Black/Black, Engine bumped to about 400HP.Ext/int mostly stock.
Upon further exploration with a philips screwdriver and a much brighter light, I was able to find access holes through the carpet, to the screws holding the speaker panels on. No further help needed...


Need help removing rear speakers in '81

Posted: 12/20/03 10:54am Message 3 of 3
Former Member
Send PM
Ft Myers, FL - USA
Joined: 5/15/2003
Posts: 16
Vette(s): 1982 Bright Blue Corvette Coupe, 5.7L 350 V8 w/ a performance chip & 160-degree fail-safe thermostat, K&N filters, Hedman Headers & a tru-dual exhaust w/ Borla tips. Turbo-700 has a B&M Shift Kit & rear end has 3.73 posi-gears.
I have a 1982 and my stock rear speakers ARE 6x9's, and I think the 81' is the same, so if you are replacing the OEM's with new 6x9 speakers, it should be an easy swap.

Hope this helps! ~ Happy Holiday's!!

|UPDATED|12/20/2003 10:54:15 AM (AZT)|/UPDATED|



|IMG|http://www.imagestation.com/picture/sraid95/p600da6ff248ca7db651142a887f9c0b4/fa30458d.jpg|/IMG|

in Forum: C3 Interior


SPONSOR AD: (Our Sponsors help support C3VR)