Home page
SPONSOR AD SPONSOR AD

Topic: Pillar post trim

in Forum: C3 Interior


Pillar post trim

Posted: 3/25/05 1:13pm Message 1 of 3
Former Member
Send PM
Louisville, KY - USA
Joined: 11/11/2003
Posts: 97
Vette(s): 1971 LT1 Convertible PS PB 43K miles

Do these unclip somehow?  Or is there a hidden screw?  Can't find it in Haynes manual.  Center came off but sides are stuck.

 

Thanks

Neil




SPONSOR AD:: (Our Sponsors help support C3VR)

Pillar post trim

Posted: 3/25/05 9:46pm Message 2 of 3
Profile Pic
Lifetime MemberLifetime Member
Moderator
Send PM
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 20214
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/ Am-Fm/map light National/Regional/Chapter NCRS "Top Flight" #2-1985 Bright Red/Carmine Cp.L-98/auto Member: NCRS, NCRS Texas, Corvette Legends of Texas
My '74 has a screw at the top, and then the plastic 'velcro' pads down the middle. They come off easily enough. Take the screw out, and pull the top away from the frame, then slide upward. Don't know if yours is attatched the same or not.


Joel Adams
C3VR Lifetime Member #56    

My Link


(click for Texas-sized view!)
             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

Pillar post trim

Posted: 3/26/05 5:24am Message 3 of 3
Former Member
Send PM
Kingston, TN - USA
Joined: 7/5/2003
Posts: 900
Vette(s): 1970 Vert Both Tops Kiesler 5 Speed Steeroids Rack and Pinion Stayfast Convertible Top
 The top is screwed down and the bottom is held into place by the dash. The middle section is held into place by the vette version of velcro. Good luck with it.  Eddie 7038437.229525463


in Forum: C3 Interior


SPONSOR AD: (Our Sponsors help support C3VR)