Topic: Power Window Troubleshooting
in Forum: C3 Interior
Already a Member?
Click Here to Login
Not yet a Member?
Click Here to Register for Free!
Former Member
Send PM
Mason, OH - USA
Joined: 8/4/2002
Posts: 17
Vette(s): 1980 Black exterior, red interior, 4 speed.
All,
My drivers side window does not work on the "80" I purchased a few weeks ago, and it's time for me to tear into it and find out what's wrong.
Does anybody have any ideas on where to start looking? Or should I start with the switch and work towards the door?
Any and all help is appreciated as always.
Regards,
Kevin in Cincy
My drivers side window does not work on the "80" I purchased a few weeks ago, and it's time for me to tear into it and find out what's wrong.
Does anybody have any ideas on where to start looking? Or should I start with the switch and work towards the door?
Any and all help is appreciated as always.
Regards,
Kevin in Cincy
SPONSOR AD:: (Our Sponsors help support C3VR)
Former Member
Send PM
Mason, OH - USA
Joined: 8/4/2002
Posts: 17
Vette(s): 1980 Black exterior, red interior, 4 speed.
Thanks Dukman,
I pulled off the door panel last night, and am getting ready to head out and do some troubleshooting. Looks like a lot of fun stuff going on inside the door of these things!!!!
Here we go....
Kevin
I pulled off the door panel last night, and am getting ready to head out and do some troubleshooting. Looks like a lot of fun stuff going on inside the door of these things!!!!
Here we go....

Kevin
Former Member
Send PM
Mason, OH - USA
Joined: 8/4/2002
Posts: 17
Vette(s): 1980 Black exterior, red interior, 4 speed.
Dukman,
Just did a little test. Hooked up the drivers side switch to the passenger side window, and it worked. So, it looks like the power window motor has gone south. I'll pull the thing out and plug it into the passenger side plug in just to make sure. Then, I guess it's "ecklers time" to get a new window motor.
Would it be wise to go ahead and buy 2 of them, knowing the inevitable will happen the minute I get the new interior all put back in the car? (the other motor will fail...probably)
Thanks again for the input. Back out to the garage....(may need to go grab a six pack for this job...)
Kevin in Cincy
Just did a little test. Hooked up the drivers side switch to the passenger side window, and it worked. So, it looks like the power window motor has gone south. I'll pull the thing out and plug it into the passenger side plug in just to make sure. Then, I guess it's "ecklers time" to get a new window motor.
Would it be wise to go ahead and buy 2 of them, knowing the inevitable will happen the minute I get the new interior all put back in the car? (the other motor will fail...probably)
Thanks again for the input. Back out to the garage....(may need to go grab a six pack for this job...)

Kevin in Cincy
in Forum: C3 Interior
SPONSOR AD: (Our Sponsors help support C3VR)