Home page
SPONSOR AD SPONSOR AD

Topic: Removed dash

in Forum: C3 Interior


Removed dash

Posted: 8/30/05 12:00pm Message 1 of 20
Former Member
Send PM
Suffern, NY - USA
Joined: 3/16/2005
Posts: 227
Vette(s): 1976 restored,new interior,custom paint(purple),body kit,rebuilt engine,trans,upgraded sound system

Sunday I removed my dash on my 76 vette to replace the circuit board on my tach, and also to do some other repairs, i discovered this

large what seemed to be some sort of heat sink,under the right side dash behind the map pocket, about 4"x6",anybody knows what this is. I have a second question, did the 76's have speakers mounted in the

kick panels,and if not can speakers be mounted behind them. I found

speakers in the dash when I removed it, but not wired up. My sound system was modified by the previous owner.




SPONSOR AD:: (Our Sponsors help support C3VR)

Removed dash

Posted: 8/30/05 12:54pm Message 2 of 20
Former Member
Send PM
Damascus, MD - USA
Joined: 12/17/2003
Posts: 247
Vette(s): 1970 Conv. 350/350, Wht./Blk.,P/W P/B,P/S,TT, 4 Spd.

I believe that is the amp for the original radio.

Speakers were in the dash in 76. You can fit a 4 x 6 speaker in the kick panels. That is how the 68 and 9s came from the factory. If you are looking for good sound, I suggest you build or buy a speaker box that fits in the cargo area. There are some excellent designs that look like the factory built them that way.

Hope that helps.

 

 

Bill




Removed dash

Posted: 8/30/05 6:18pm Message 3 of 20
Profile Pic
Lifetime MemberLifetime Member
Moderator
Send PM
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 20214
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/ Am-Fm/map light National/Regional/Chapter NCRS "Top Flight" #2-1985 Bright Red/Carmine Cp.L-98/auto Member: NCRS, NCRS Texas, Corvette Legends of Texas
That's exactly what it be!
The size of the dash area where the radio fits wasn't big enough for a normal sized GM radio, so they had to make it in two pieces. The later cars(77-up) had the redesigned console, to accept normal stereo systems.
You can mount speakers in the kick panels, unless you have A/C, then it's not a good idea. The recirc. door is in the pass. side kick panel, so putting a speaker there is tough to do. Adams' Apple38594.7651736111


Joel Adams
C3VR Lifetime Member #56    

My Link


(click for Texas-sized view!)
             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

Removed dash

Posted: 8/30/05 7:32pm Message 4 of 20
Lifetime MemberLifetime Member
Send PM
Irving, TX - USA
Joined: 8/21/2004
Posts: 4273
Vette(s): #1 -1969 Corvette Coupe Riverside Gold, black interior,MN,A/C,350/350,PS,PB,window cranks. #2 -2000 C5, black/black, 6 sp, Bose system & lots of buttons.
I tried to get the dash off, but I needed an extra person on the other side to help "twist" it off. I want to replace the radio and speakers. As of present, I have the original radio & 4X6 speakers in the kick panels - it sucks!! I don't know what to replace it with. What's good?? Not much out there to fit a '69. Bought this Ipod until I can decide what to put in there.



�����
My Link


MICK - C3VR Lifetime Member #113

Removed dash

Posted: 8/31/05 9:53am Message 5 of 20
Former Member
Send PM
Suffern, NY - USA
Joined: 3/16/2005
Posts: 227
Vette(s): 1976 restored,new interior,custom paint(purple),body kit,rebuilt engine,trans,upgraded sound system

the kick panels use 4x6 speakers,I found replacement speakers in

some of the corvette catalogs, ecklers,corvette america,and corvette

central,or any good stereo shop has great speakers,alpine,or infinity

or pioneers. My slot where the original radio was cut out and sony cd

player was installed.




Removed dash

Posted: 8/31/05 10:57am Message 6 of 20
Lifetime MemberLifetime Member
Send PM
DUNEDIN, FL - USA
Joined: 10/22/2004
Posts: 833
Vette(s): 1969 COUPE CORTEZ SILVER, BRIGHT BLUE INTERIOR 383 cu. in. 512 HP. Hooker headers w/ side pipes PS PS AC AM FM STEREO. 68,000.MILES C5 5oth Anniversary Coupe , auto.350hp

My stock radio is a piece of junk too!. did the same with the IpoD. I like the 200 watt Kenwood replacement in Corvette America or Ecklers Catalog. It comes with a new Dash panel to fit it too. Keep the original. I have some other things to take care on the priority list befoer I purchase it.

 




Removed dash

Posted: 8/31/05 2:58pm Message 7 of 20
Limited Member
Send PM
Newark, DE - USA
Joined: 7/26/2004
Posts: 468
Vette(s): 1968 Conv, 454HO,500HP-600TQ, TKO-600,3:70 HD rear,hotrod air, custom paint & suspension,1973 Ruby Red,T-top, 383 Stroker, TK)-500,frame off restro, 1967 Dodge Coronet, 340 stroker to 406, Dana 60

Just finished rewiring the vette,since I had the dash off I installed a Pioneer XM Radio...great sound. This radio is rated 60 watts X 4...good-by amp. Now I can hear the radio & have more room in the back.




                                               

Removed dash

Posted: 9/1/05 7:30pm Message 8 of 20
Lifetime MemberLifetime Member
Send PM
Irving, TX - USA
Joined: 8/21/2004
Posts: 4273
Vette(s): #1 -1969 Corvette Coupe Riverside Gold, black interior,MN,A/C,350/350,PS,PB,window cranks. #2 -2000 C5, black/black, 6 sp, Bose system & lots of buttons.
Hey you all, thanks for the radio advise. I've been eyeing that Kenwood in the Corvette America catalog. Also looking at the Blaupunkt with 230 Watts. The Kenwood has the CD-R/CD-RW.....that's a plus to me. Not sure if the Blaupunkt has both (doesn't say). The Pioneer XM Radio sound good too!! I wonder if that has the CD player in it too.

What about speakers in the back?? I was thinking about box speakers, but there's not much room back there. I saw that Soundbar System in the Catalog that fits in the cargo area. Does anyone have those in their car? Maybe that would be too much with some really good 4X6's in the kick panels??!!!

Knotacare - where did you get the Pioneer and what do you have in your kick panels? Anything in the back?? I need to fix some wiring too and replace the relay for the air conditioning. How long did it take to rewire??




�����
My Link


MICK - C3VR Lifetime Member #113

Removed dash

Posted: 9/2/05 10:12am Message 9 of 20
Former Member
Send PM
Suffern, NY - USA
Joined: 3/16/2005
Posts: 227
Vette(s): 1976 restored,new interior,custom paint(purple),body kit,rebuilt engine,trans,upgraded sound system

Right now I have a custom installion,the person I bought the car from

had special enclosers built,where the kick panels are with 6" alpine, but they protrude into the car foot wells not leaving much leg room.I

wanted to remove them and replace them with 4X6's in the original kick panels,but adam said because I have air cond.,they won't fit.I'll

probably go with new spaeakers in the dash.The entire back of the car,has custom built enclosers with 2 10" JL woofers ,and two amplifiers, one powerimg the woofers,and the other powering the 6"

speakers in the front and two more 6" behind the seats.




Removed dash

Posted: 9/2/05 10:24am Message 10 of 20
Former Member
Send PM
Suffern, NY - USA
Joined: 3/16/2005
Posts: 227
Vette(s): 1976 restored,new interior,custom paint(purple),body kit,rebuilt engine,trans,upgraded sound system

This forum is the greatest, The answer to my question about the silver object under the dash was right on. Yesterday I removed the

amplfier as its not being used anymore. Continuing dismantling the dash, as I am having heat problems as everyone else is,and want to

correct it,I discovered the vacuum operated defectors in ac/heat

distrubutor box are not working. there seems to be 3 vacuum valves that operate the the doors for the defroster,outside air and air cond,and heat conrolled by the console switch, any ideas what the problem is, I found a vacuum conrol switch in doc rebuild's catalog which mounts on the console select switch. could that be the problem,or could it be the main vacuum line feeding the switch. any

suggestions would be great




in Forum: C3 Interior


SPONSOR AD: (Our Sponsors help support C3VR)