Home page
SPONSOR AD

Topic: Removing Inside Window Handle

in Forum: C3 Interior

Removing Inside Window Handle

Posted: 5/29/15 11:29am Message 1 of 7
Gold MemberGold Member
Send PM
San Antonio, TX - USA
Joined: 10/2/2006
Posts: 54
Vette(s): 1972 Red Corvette 350 4-speed coupe
Good Afternoon,
I'm having trouble removing the inside window handle.  What's the best way to get that off so I can get the door panel off? I know it seems like it would be simple, but I'm getting frustrated.  Thank you.



SPONSOR AD:: (Our Sponsors help support C3VR)

Re: Removing Inside Window Handle

Posted: 5/29/15 11:57am Message 2 of 7
Profile Pic
Lifetime MemberLifetime Member
Send PM
Temple City, CA - USA
Joined: 10/3/2010
Posts: 365
Vette(s): 1969 Daytona Yellow. 350 / Automatic.
Mid America Motorworks (and others I'm sure) sell a tool to pull out the clip for $7.  I used a tool for my '29 Chevy.  Otherwise, I suppose you could grab the clip with any small hook or a small pair of needle nose pliers.  Its tedious even with the toll.


Re: Removing Inside Window Handle

Posted: 5/29/15 12:02pm Message 3 of 7
Profile Pic
Lifetime MemberLifetime Member
Moderator
Send PM
CUYAHOGA FALLS, OH - USA
Joined: 12/2/2003
Posts: 6424
Vette(s): 1975 C3 Red, T-Tops, Black Interior. All I need is time and money! Getting there!
There is a c shaped clip with tabs that hold the crank handle to the shaft.  There is a window crank removal tool that slides in just under the handle while lined up with the window crank, if the clip was put on properly.  If not you insert the tool from the opposite side.  Once the clip is pushed off the handle remove the tool and pull the handle off.
If you do not have a tool a small hook will do.  Put a screwdriver or putty knife between the handle and the door panel from the side of the handle and create a small gap so you can look down and see the clip.  Hook it and give a tug and pull the clip out.  The handle will come off.
 
To reinstall the clip just push it back in place on the handle, line up the handle where you want it to be, and just push/snap it back on.
 
Be carefull not to mar the door panel,  And don't loose the clip.  You can get more clips in most parts stores.



Re: Removing Inside Window Handle

Posted: 5/29/15 12:16pm Message 4 of 7
Gold MemberGold Member
Send PM
San Antonio, TX - USA
Joined: 10/2/2006
Posts: 54
Vette(s): 1972 Red Corvette 350 4-speed coupe
Thank you guys, I'll give the wire hook a try, if not I'll have to order the tool.  I appreciate the help.


Re: Removing Inside Window Handle

Posted: 5/29/15 1:05pm Message 5 of 7
Lifetime MemberLifetime Member
Send PM
Equinunk, PA - USA
Joined: 10/31/2007
Posts: 2465
Vette(s): 1972 conv, 4-speed, 350, 200hp, numbers match, rally wheels, war bonnett yellow w/white top. good condition, nice driver.
Most car parts stores have them. They are very inexpensive.


Re: Removing Inside Window Handle

Posted: 5/29/15 2:17pm Message 6 of 7
Profile Pic
Lifetime MemberLifetime Member
Moderator
Send PM
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 20214
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/ Am-Fm/map light National/Regional/Chapter NCRS "Top Flight" #2-1985 Bright Red/Carmine Cp.L-98/auto Member: NCRS, NCRS Texas, Corvette Legends of Texas





Joel Adams
C3VR Lifetime Member #56    

My Link


(click for Texas-sized view!)
             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

Re: Removing Inside Window Handle

Posted: 5/30/15 9:23am Message 7 of 7
Gold MemberGold Member
Send PM
San Antonio, TX - USA
Joined: 10/2/2006
Posts: 54
Vette(s): 1972 Red Corvette 350 4-speed coupe
Great illustration Joel, Thank you.  I'm going down to O'Reilly's to see if they have that tool.


in Forum: C3 Interior


SPONSOR AD: (Our Sponsors help support C3VR)