Topic: shoulder belts in 72 conv.
in Forum: C3 Interior
Already a Member?
Click Here to Login
Not yet a Member?
Click Here to Register for Free!
Former Member
Send PM
BRADENTON, FL - USA
Joined: 8/4/2002
Posts: 669
Vette(s): 1972 convertible 350 auto trans, delux int, air, ps, pb, t/t wheel, pw, 79,000 org miles Rare one year only color
did 72 conv's come with shoulder belts. were they standard or optional. i see some mention of them going thru the seat in the assembly manual but i don't see any provision for this.
|IMG|http://www.c3vr.com/member_uploads/1301_1400/1333/br80.jpg |/IMG|
SPONSOR AD:: (Our Sponsors help support C3VR)
Former Member
Send PM
Castle Rock, CO - USA
Joined: 4/21/2002
Posts: 179
Vette(s): 1973 T-Top
1993 Coupe
Gary,
I believe shoulder belts were optional on roadsters and standard on coupes. If yours had them there would be a small plate on the door side of the seat back and the metal trim up by your head would have a slot in the indented part of the trim.
They can be added to your car, however they are pricey.
Alex
I believe shoulder belts were optional on roadsters and standard on coupes. If yours had them there would be a small plate on the door side of the seat back and the metal trim up by your head would have a slot in the indented part of the trim.
They can be added to your car, however they are pricey.
Alex
Limited Member
Send PM
YORK, PA - USA
Joined: 11/12/2001
Posts: 14
Vette(s): 72 Convertible 350 base 4spd A/C Milli Miglia Red Black int. Original numbers, 150k miles
GM does or did make replacement sholder straps for about $80, not sure of the part number. They did go through the seat back and from the numbers a good many convertibles did have them.
in Forum: C3 Interior
SPONSOR AD: (Our Sponsors help support C3VR)