Home page
SPONSOR AD

Topic: What should I replace while the dash is out?

in Forum: C3 Interior

What should I replace while the dash is out?

Posted: 8/24/08 8:01pm Message 1 of 5
Lifetime MemberLifetime Member
Send PM
Huntsville, AL - USA
Joined: 11/15/2003
Posts: 857
Vette(s): 1971 convertible,375 HP 350ci,Muncie 4-speed,Edelbrock aluminum heads and RPM air-gap manifold,HEI distrubiter - old school mechanical tach drive. LOUD side exhaust!
I'm just about ready to start ripping out the interior. I have just about everything I need in boxes in the garage. I'll be replacing the carpet, most trim pieces, console, dash pads, etc. While I have the dash off, I'm putting in better speakers, replacing ALL the bulbs, replacing the heater core, and putting in a new tach cable (old one snapped at the distributer end). Is there anything else I should replace "while I'm at it"? I know that gets expensiveShocked, but I want to have the dash out once.


SPONSOR AD:: (Our Sponsors help support C3VR)

What should I replace while the dash is out?

Posted: 8/25/08 5:23am Message 2 of 5
Lifetime MemberLifetime Member
Moderator
Send PM
BINGHAMTON, NY - USA
Joined: 7/19/2003
Posts: 3808
Vette(s): ......
Check out your air "doors for your heater and ventilation,along with the duct hoses.put some insulation on the inside of the firewall behind the dash,and cover up any unnecessary holes,a lot of engine heat comes through that firewall,also check your heater box gaskets while your in there Thumbs%20Up


C3VR Lifetime Member #93

What should I replace while the dash is out?

Posted: 8/25/08 7:34am Message 3 of 5
Limited Member
Send PM
visalia, CA - USA
Joined: 10/27/2006
Posts: 641
Vette(s): 1981 red with silver interior,350(L-81), 350TH, glass t-tops, aluminium rims, 1980 Black/ Black int., 350 GM crate engine/350TH, 1976 black/ saddle int., L-82 w/headers, holly carb, Hypertech ignition

Im doing the same thing on the a '68 as well ( have dash out )  .  I was going to replace any vacume parts as well ( switchs , hoses , etc) 




What should I replace while the dash is out?

Posted: 8/28/08 5:03am Message 4 of 5
Former Member
Send PM
Falls Church, VA - USA
Joined: 3/22/2006
Posts: 232
Vette(s): 1975, 4 speed, L48, NOW Silver mist, Oxblood inside 2003 50th Av Torch RED little brother to 75
Just my 2 Cents if you are having door problems such as a sag great time to replace door hinges or at least replace the pins. Also agree with Ron, put some insulation on the firewall. Oh crap now you got me going. Heater core OK if not nows the time.  And of course the heater box diaphram. Thats all for now maybe 5 cents worth instead of 2.
 
Guy



What should I replace while the dash is out?

Posted: 8/28/08 7:16am Message 5 of 5
Former Member
Send PM
Roseland, NJ - USA
Joined: 12/4/2003
Posts: 966
Vette(s): 1974, 454 with 4 on the floor, matching numbers.
Sounds like you're on the right track.  You might as well change the speedo cable too, otherwise you may have to take the dash apart again when and if it fails.


in Forum: C3 Interior


SPONSOR AD: (Our Sponsors help support C3VR)