Home page
SPONSOR AD SPONSOR AD

Topic: build sheet / window sticker

in Forum: C3 Special Edition Vettes


build sheet / window sticker

Posted: 3/3/04 2:19pm Message 1 of 13
Former Member
Send PM
Joined: 2/12/2004
Posts: 43

1) is the NCM the only place to purchase a copy of a built sheet and window sticker? They seem pretty proud of their service (expensive).

2) anyone find there's on a CE? I've heard the can be above the gas tank, above the differential, near the power antannae. I've replaced the mast in my antannae, so I know it's not there.

Thanks!


'82 CE
SPONSOR AD:: (Our Sponsors help support C3VR)

build sheet / window sticker

Posted: 3/3/04 6:28pm Message 2 of 13
Former Member
Send PM
Tecumseh, MI - USA
Joined: 9/14/2003
Posts: 221
Vette(s): 1980 all org. with 18000 act. miles dk claret with matching interior..Eagle alloys ..loaded..excellent cond.
On my 80, I found it above the differental on the front side of the gas tank. Also found a build tag between the rear spoiler and where it bolts to the body (top dead center). Hope this helps


|thumb|


build sheet / window sticker

Posted: 3/31/04 10:17am Message 3 of 13
Former Member
Send PM
Moore, SC - USA
Joined: 8/23/2002
Posts: 28
Vette(s): Two 1982 Collector's Editions
If it is in the location above gas tank, how do you get it out?

I am not thrilled about taking anything apart (not ready for a restoration) just to get the sheet.


build sheet / window sticker

Posted: 3/31/04 11:09am Message 4 of 13
Lifetime MemberLifetime Member
Moderator
Send PM
BINGHAMTON, NY - USA
Joined: 7/19/2003
Posts: 3808
Vette(s): ......
A lot of T.L.C.,you have to drop the tank,it is glued to the top ,dont pull on it ,you will destroy it and you probably wont be able to read it anyway |eek| |frown|


C3VR Lifetime Member #93

build sheet / window sticker

Posted: 4/1/04 8:39pm Message 5 of 13
Former Member
Send PM
Tecumseh, MI - USA
Joined: 9/14/2003
Posts: 221
Vette(s): 1980 all org. with 18000 act. miles dk claret with matching interior..Eagle alloys ..loaded..excellent cond.
I found my build sheet on the front of the gas tank. I pulled my spare tire carrier and the sheet was glued at the top only.Right above the rear spring behind the carrier assy. Was able to retrieve the complete sheet. Car was built on 5/12/79 and was 15065th off the line and was shipped to Omaha,Nebraska. Happy hunting.. |thumb| PS You have to drill out two rivets to get the top half of the spare cover top shield off. Replace with two sheet metal screws. Use flashlight first to see if yours is on the front.

1980 claret/claret

|UPDATED|4/1/2004 8:39:00 PM (AZT)|/UPDATED|



build sheet / window sticker

Posted: 4/6/04 4:34pm Message 6 of 13
Former Member
Send PM
HURRICANE, UT - USA
Joined: 1/11/2004
Posts: 119
Vette(s): 1978 L82 4 speed Black on Black vin12231 BDay Nov 7 1977 1966 327 Roadster BDay May 18, 1966 (next project)
Found my build sheet for my 78 on the top of the gas tank on the drivers side. With a flashlight, you should be able to see the edge over the front of the tank. Funny thing is that the window stickers shows a MM4 transmission but the build sheet shows a M20 which was standard in 77. The car build date is 12/7/77.
Does anyone know of a company that can restore the build sheets? Mine is in good shape, just want to get it cleaned up and protected. There was some information on the top section not legible, however all the options are clearly listed.
|saluteflag| |thumb|
-Eric


build sheet / window sticker

Posted: 4/6/04 9:36pm Message 7 of 13
Former Member
Send PM
Joined: 10/21/2003
Posts: 1220
Eric,the M20 is the wide ratio 4 speed which you had to get with the L48. The M21 close ratio was available with the L82 but the option form had to be checked, otherwise you got the M20.According to the Black Book only 3385 78's built with the M21. Both my 78's have MX1 auto on the window stickers but M38 on the build sheet. Don't know why, tho.How much info are you missing at the top of the form? One of mine was pretty bad but when I started comparing it to some others a lot of the info seemed to just pop up. Made a copy by cut and pasting on a blank sheet. Got the blank sheet by white-outing a photo copy of a good sheet. Don't know how you would preserve the bad one without spending bucks for an expert. I keep the original raggedy one in my folder with my homemade "reproduction" one. Have a pristeen copy from my 79 that I could TRY to email so you could compare, most of the info is the same. Mike


build sheet / window sticker

Posted: 4/7/04 5:14pm Message 8 of 13
Former Member
Send PM
HURRICANE, UT - USA
Joined: 1/11/2004
Posts: 119
Vette(s): 1978 L82 4 speed Black on Black vin12231 BDay Nov 7 1977 1966 327 Roadster BDay May 18, 1966 (next project)
Missing most of the top info on the right hand side. If you could email mail me a copy of yours, I would know what is missing. Thx. |cheers|


build sheet / window sticker

Posted: 1/12/08 4:46am Message 9 of 13
Profile Pic
Lifetime MemberLifetime Member
Send PM
Greensburg, IN - USA
Joined: 9/24/2003
Posts: 5189
Vette(s): Previous: 1984 Coupe, 1988 Maroon Coupe, 1989 Coupe, 2001 Roadster Present: 1967 Stingray Roadster, 1976 Stingray Coupe, 1989 Roadster..
I have been working on the Blacray now that is the Mod. season in Indiana. While I was changing the shocks in the back I thought I would look some for mine.

I hadn't ever before because I know that prior to me the car has lived a less than pristine life. Much to my surprise I found a portion of mine dangling yet from the front of the tank. Most of it is illedgible but you can make out what it is supposed to be.

If anyone has a PDF version or a photo copy of a blank tank sticker that they can e-mail me that would be cool. If you want to PM me I will provide you my e-mail address.

I would like to create one based on the information I have and laminate both. I have a pretty nice display / information binder that I have created since acquiring this car. Hopefully future owners will appreciate the time, money, and passion that have been returned to the car during my tenure.


build sheet / window sticker

Posted: 1/12/08 3:23pm Message 10 of 13
Profile Pic
Standard Member
Send PM
Florence, KY - USA
Joined: 9/9/2007
Posts: 143
Vette(s): 1977 Coupe; yellow, 4 speed, one option car with original engine
I was able to get a copy of the original invoice from:
GM Media Archive & Vehicle Invoice Collection at Allied Vaughn 
Detroit, MI 
p.734-421-0273 x.107 
p.734-261-5086 
f.734-261-5216 
vehicleinvoice@gmmediaarchive.com
...not as good as a build sheet but was a lot less work and cleaner than dropping the fuel tank and hoping.
Cost was $ 50 for a pdf file



current
1977 Coupe
 
gone but not forgotten
1996 Grand Sport
1984 coupe 
1974 coupe
1964 roadster

in Forum: C3 Special Edition Vettes


SPONSOR AD: (Our Sponsors help support C3VR)