For a 69 coupe, I have procured the new rear window glass and the rubber strip that's apparently supposed to be bedded between the glass and the extruded aluminum window frame.

A friend said not to use the rubber strip, but to just put a generous amount of 3M weather strip sealant in the glass channel of the aluminum frame.

Obviously, I'm not a glass install guy so what are the opinions from all you glass install people out there?

Iirc, the frame comes apart on the rear window. With it dis-assembled, you shouldn't really have any issues installing the seal(rubber strip) into the frame channel(s), and then carefully sliding the frame down over the glass. Doing this with it all warm will certainly help. If you do use any sealer on the thing, be sure to use a urethane sealer...a silicon type sealer will hold water, where urethane repels water.

My Link


(click for Texas-sized view!)             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

You could run it by a Safelite AutoGlass shop and ask them for a recommendation also.

1973 L-82 4 spd