Home page
SPONSOR AD

Support our Vendors!  |  Advertise Here

Topic: remove horn button???

in Forum: C3 Interior


Already a Member?
Login
Not yet a Member?
Register for Free!

Back to Forum List
New TopicNew Topic-Locked
ReplyReply-Locked
New PollNew Poll-Locked
Search
Hide Signatures
remove horn button??? (1/9)
 1/3/06 9:13pm
Reds82CELifetime Member
Lifetime Member
Send Private Message

McKinney, TX - USA

Vette(s):
1982 Collector Edition, Silver-Beige metallic, 45000 miles and counting. 2024 Riptide Blue Z06 Convertible


Joined: 4/8/2005
Posts: 259

OK, dumb question.....how do I remove my horn button (82CE)...My steering wheel is loose and based on everything I have read in the forum it sounds like all I need to do is tighten 3 screws under the horn button/cap.  By the pictures, it looks like I should be able to pull up on the center horn button but mine doesn't seem to budge.

______________

Lifetime Member #58
Our 82CE

(Click to see a larger version)




Reply-LockedReply-Locked
Reply w/QuoteReply w/Quote-Locked
Our Sponsors help support C3VR
remove horn button??? (2/9)
 1/3/06 9:21pm
Adams' AppleLifetime Member
Lifetime Member
Moderator
Send Private Message

Duncanville, TX - USA

Vette(s):
#1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/ Am-Fm/map light National/Regional/Chapter NCRS "Top Flight" #2-1985 Bright Red/Carmine Cp.L-98/auto Member: NCRS, NCRS Texas, Corvette Legends of Texas


Joined: 11/8/2003
Posts: 20206

Pull harder!
You'll have to grasp the horn button on the outer edge, and pull straight up.

______________

Joel Adams
C3VR Lifetime Member #56    

My Link


(click for Texas-sized view!)
             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

Reply-LockedReply-Locked
Reply w/QuoteReply w/Quote-Locked
remove horn button??? (3/9)
 1/3/06 9:25pm
Iron82Lifetime Member
Lifetime Member
Send Private Message


Vette(s):
1982 Collector Edition #3413


Joined: 7/24/2003
Posts: 2150

The horn cap is really tight in there.  As Joel said.  Pull up with good amount of force.

 

Reply-LockedReply-Locked
Reply w/QuoteReply w/Quote-Locked
remove horn button??? (4/9)
 1/3/06 9:27pm
Reds82CELifetime Member
Lifetime Member
Send Private Message

McKinney, TX - USA

Vette(s):
1982 Collector Edition, Silver-Beige metallic, 45000 miles and counting. 2024 Riptide Blue Z06 Convertible


Joined: 4/8/2005
Posts: 259

OK, will give it a more agressive try .... Not knowing what I was doing I didn't want to pull too hard (I usually do and then break something)... thanks

______________

Lifetime Member #58
Our 82CE

(Click to see a larger version)




Reply-LockedReply-Locked
Reply w/QuoteReply w/Quote-Locked
remove horn button??? (5/9)
 1/4/06 8:16am
74-454Lifetime Member
Lifetime Member
Send Private Message

Canada

Vette(s):
Coupe 74 - 454 Drive it like you stole it!


Joined: 8/6/2004
Posts: 533

I had a harder time putting mine back in correctly.  The metal ring that retains the horn cap (3 sections I think), might bend a little, so it will not be straight or as tight when you put it back.  I had to ply them back as best as I could. (probably because I didn't pull straight).
 
Make sure they are straight, as they make the contact for the horn to function properly.
Reply-LockedReply-Locked
Reply w/QuoteReply w/Quote-Locked
remove horn button??? (6/9)
 1/4/06 9:56am
KeBo
Former Member

Send Private Message

Kendall Park, NJ - USA

Vette(s):
1981 - 59 Beige over Cinnebar leather. Edlebrock top end, 2200 stall w/shift kit, 3:55s, Mufflex maniback exhaust, nice stereo, 16 in AREs w/BFGs


Joined: 3/9/2005
Posts: 789

I did the same tightening last year.  Wasnt too hard and Im all thumbs...  Tip, disconnect the battery when reinstalling.  You'll toot enough to have the long stare from the wife!
Reply-LockedReply-Locked
Reply w/QuoteReply w/Quote-Locked
remove horn button??? (7/9)
 1/4/06 3:40pm
Ron 78Lifetime Member
Lifetime Member
Moderator
Send Private Message

BINGHAMTON, NY - USA

Vette(s):
......


Joined: 7/19/2003
Posts: 3808

Use a Jack Handle

______________

C3VR Lifetime Member #93

Reply-LockedReply-Locked
Reply w/QuoteReply w/Quote-Locked
remove horn button??? (8/9)
 1/7/06 8:11pm
Reds82CELifetime Member
Lifetime Member
Send Private Message

McKinney, TX - USA

Vette(s):
1982 Collector Edition, Silver-Beige metallic, 45000 miles and counting. 2024 Riptide Blue Z06 Convertible


Joined: 4/8/2005
Posts: 259

Well, that was the easiest repair in a long long time....pulled straight up on the horn button and it just pop'd off (had the jack handle ready but not needed ).  Removed the three screws and took out the rings...then used a drop of paper whiteout to mark the position of the telescopic center screw...when all that was off, I found the center nut was barely snug.....got out the 1/2 inch socket set, tighten the center nut real snug and put everything back together in reverse order. 

Steering wheel is very secure --- no wobble...Definetly good advice to disconnect the battery....that horn gets annoying...

Thanks everyone



______________

Lifetime Member #58
Our 82CE

(Click to see a larger version)




Reply-LockedReply-Locked
Reply w/QuoteReply w/Quote-Locked
remove horn button??? (9/9)
 1/7/06 8:51pm
Adams' AppleLifetime Member
Lifetime Member
Moderator
Send Private Message

Duncanville, TX - USA

Vette(s):
#1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/ Am-Fm/map light National/Regional/Chapter NCRS "Top Flight" #2-1985 Bright Red/Carmine Cp.L-98/auto Member: NCRS, NCRS Texas, Corvette Legends of Texas


Joined: 11/8/2003
Posts: 20206

You're hired!

                                              

______________

Joel Adams
C3VR Lifetime Member #56    

My Link


(click for Texas-sized view!)
             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

Reply-LockedReply-Locked
Reply w/QuoteReply w/Quote-Locked
Our Sponsors help support C3VR