I have removed horn button and now see the 6 philips head screws holding st. wheel in place but can't get to 6 screws because horn spring and other rusty junk in way.....instructions or good guesses welcome.

just take a picture of how things are seated and you can take the 6 screws out .. nothing scary will happen :)

i had made some pics  but can't find them anymore  :(

art-corvette

Its fairly simple. Ya can just lay stuff out in a line as ya remove it. Reassemble in reverse.
If ya don't have one now would be a good time for me ta mention ya will need a wheel puller ta remove the wheel from the splined shaft.
Mines pretty old but I reckon this can be bought at most auto parts store for less than $20.00.

Disconnect the NEG post on the battery first. May save some of your friendships with the neighbors

If this is a tilt wheel, you need a bolt (special tool) to keep the shaft from pulling upward when using the steering wheel puller.

[QUOTE=LukesVette] Disconnect the NEG post on the battery first. May save some of your friendships with the neighbors[IMG]http://www.c3vr.com/forum/smileys/smiley4.gif" height="17" width="17" align="absmiddle" alt="Big%20smile">[/QUOTE]

I changed my wheel on a Sunday morning without disconnecting the battery.
It came off easily. '82 doesn't require a wheel puller.

But putting everything back together, the neighbors wanted to know why I was blowing my horn so much.

Just tell them you were really honkin through the job!  kstyer2006-10-10 17:04:23

Here ya go try this it may help

Flemgunner,I went to your provided link.The photo shows a person holding the round,spring deal.That is the pc.I don't know how to remove.I turned it, twisted it,still don't know what to do.Any tricks?

Yep thats me there should just be 3 screws that hold that on.