what a trip this has been. said earlier this started over a $2 part.
used to be when you replaced a part it was done. granted that sometimes
it wasn't the part that was bad but at least you could say in the end
it's new so now i don't have to worry about it.
not anymore. replaced map sensor, tps, computer (twice and technically
4 times). still couldn't get it to read right voltage thru the map
sensor. replaced vacuum lines, still wrong.
original computer from gm wasn't good as i found this out from
installing a used computer off of ebay. got a replacement from gm and
after changing vacuum lines installed that. no change in map sensor
voltage but now coming up with est problem. scratch the head and
figured did everything i could by following the directions now let me
guess.
had the original map sensor so i reinstalled that. map voltage problem
goes away but now that est problem there. had to run out for a bit and
now thinking what to do. i figured i didn't have the est problem with
the used computer so let me try that one again. install it and
finally no codes are showing.
all goes to show computers can be fine but fixing them is a guessing game even with a scanner.
______________
LIFETIME MEMBER #97
THE DYNAMIC DUO