I tried a search for this and couldn't find anything.
The outer fender top edges are rounded instead of being sharp edged. I don't have access to a another 74 to see if this is correct or not. The reason I ask is the right side is rounded and the left side is pretty sharp so which is correct. I think it would look much better if the fender edge came to a sharp point but I want to be doing this right.
Two pictures of the new fender edge I created. Is this correct? If it should be rounded more I will sand it to get the right profile.
Thanks for any help you can give.
______________
It has been over a year since I started. I had to quit the project so
the car just sat in the garage. I was able to get started again in May 2012. As of July 27 2012 I have done the fiberglass repairs and applied Slick Sand High Build Primer.
https://www.c3vr.com/member_uploads/14401_14500/14470/Doors-off-(Copy)201261111476r.jpg