DanT
I think I have fixed the inner heater core side and just have to fix the the one bolt hole on the blower motor side. I also straightened the bolt for the blower motor side at the bottom. I also had my fender splash shields off, when I put on my chrome mesh fender grills. My inner wheel well at the splash shield was broken and the bolt holes were larger than the bolts, so I bought a fiberglass kit and fixed the wheel to splash shield mount and the bolt holes under the side rails. I will finish the tach and dash this coming weekend when I get the new circuit board and tach filter this week. Then its time to take off the front bumper an other parts to put in the body mounts. It has taken awhile but it is coming along and I plan to be driving by my insurance time and change from Blazer to corvette. I'll be talking to YA, Thanks ZAPPAREX