The switch above the accelerator pedal has two parts...one side for the cowl induction door, and the other side for the kickdown. Make sure you check both sides for power.
There will be no voltage at the trans connector unless the kickdown switch is fully engaged, and the key is on. If you tested it with the key on, and pedal-to-the-metal, and got no voltage, ya gotta start at the switch. Lemmie look in the Service manual...the wiring diagrams I have do NOT show the wiring for that....
______________
Joel Adams
C3VR Lifetime Member #56
My Link
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"