Sorry to hear that Ron, thats exactly what my 78 Pacer was doing, just before the total rebuild of the transmission   It would start, run fine, head down the road, 1st no prob, 2nd no prob, drive, nothing there.  I hope yours is a much simplier problem then I had.

______________

MARK
LIFETIME MEMBER #117

Click here to see my new friend P-Racer
"Keep up the Pace"

You go to weddings and SHOOT people?!?!?!?
You ARE EBO!!! Yep and even better, I have over 100 brides.

______________

Click on image for larger view!
LIFETIME MEMBER 151

Well I got her up on jackstands today ,got out the creeper an slid under there come to find out that the vacuum line wasn't fit inside the modulater valve the way it's supposed to be,and the pointy end of the vacuum line had wore a hole in the rubber hose that connects the two of them.so I decided what the hey,I'll take the modulater valve off,and through on a new one,yah right, cant get to the bolt that holds on the retainer clip,I bet the engineer that designed that is still laughin his @$$ off,I'll figure out somethin

______________

C3VR Lifetime Member #93
 

[QUOTE=ebo]
You go to weddings and SHOOT people?!?!?!?
You ARE EBO!!! Yep and even better, I have over 100 brides.[/QUOTE] Oh Oh, what does the ebo woman say about 100 brides?..........you're not only ebo...you have to be the biggest stud alive...........some guys have all the luck.  

______________

Don't break it.

The problem isn't braking it ,it's gettin too it,the exhaust is in the way,cant get a turn on it with a box end wrench,cant get at it with a socket

______________

C3VR Lifetime Member #93
 

Ron can ya get one of those strap wrenches around it?

______________

Click on image for larger view!
LIFETIME MEMBER 151

It's a half inch bolt that holds a clamp that holds the mod valve in place,the mod turns but I cant pull it out till I get the bolt out that holds the retainer

______________

C3VR Lifetime Member #93
 

What about a distributor wrench or offset wrench?

Ron, ya needs a 1/2" wobble socket, or a universal joint type adapter, and a long extension.
If all else fails, you may want to drop the crossmember down, but I've always been able to get at them with a wobble socket...

              Wobble Universal Adaptor

______________

Joel Adams
C3VR Lifetime Member #56    
My Link


(click for Texas-sized view!)             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

Good call Joel