Greetings, I have been sorting out my exterior/interior lighting and I am down to the last problem.. Gauge lighting. So far I have chased all the exterior lighting issues down and have everything working outside the car.. Lights, tail lights, brake lights, marker lights. I also cleaned all the bulb sockets and replaced all bulbs, but not gauges yet. I did replace the light switch with a new one from Ecklers, definitley improved the feel of the switch.. much tighter than the older one, but still no gauge lighting. I also ordered the OsoEzee (sp?) wiring diagrams, but don't have them yet.
So I am hoping to get a few pointers on where to look, what to disassemble to get to those places where I may have a loose ground, disconnected wiring, etc.. BTW, The Interior cabin lighting does work when you turn the light switch fully counter clockwise, but gauge console and speedo/tach lighting is still not working.
Thanks in advance for any and all help.
______________
Daytona Yellow '75 350 Muncie 4 spd
'73 454 on the engine stand.