Afaik, it should work. There MAY be some minor differences in bumper mounting holes front/rear, but not 100% sure. As far as the body bolting on, it
should bolt right up.....
The only major issue is to be sure the replacement frame had the same type transmission....auto or 4 speed. The 4 speed trans crossmembers are welded to the frame, but the automatic trans crossmembers are bolted on. If the '68 is an automatic, he'll need to replace the frame with an automatic frame.....there's NO way to remove/install the auto trans with the welded crossmember. However, if the '68 is a standard trans, and the replacement frame is from an automatic, that's a bonus....makes it MUCH easier to remove/replace the trans.
|UPDATED|5/29/2014 7:42:37 PM (AZT)|/UPDATED|
______________
Joel Adams
C3VR Lifetime Member #56
My Link
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"