Here's pretty much the front finished. Some of the seams I may use some duct tape or reflective/thermal tape- but that's it.
(over-sized images missing - e-mail sent to member - Norsky)
I haven't done any of the back. My carpet is fine for now there, so I'll leave well enough alone.
There are 3 sheets left of the 8 in the kit. The 8 big sheets are huge- you'll never use it all at once. Cut it in half and start small, then overlap. Any scraps I kept. Trust me, you'll use every bit of those pieces- then i would recover them in layers, if need be.
I used a small razor knife, a pair of scissors, and a roller I bought large from home depot for $13- couldn't find a small, cheap wooden roller (even at walmart) but this worked good. I also used the butt of the scissors (that wrap over your fingers) in tight places, too, to put pressure on it to stick down.
Sometimes I used some alcohol to swipe the area if it was full of dust or old underlayment.
My hands are sore, and me knees, too. Make sure you get an old couch pillow or something to kneel on. It took me at least 8 hours for this, with a few more things to finish up.
|UPDATED|11/20/2011 4:56:25 PM (AZT)|/UPDATED|