1. disconnect the battery ground cable
2. loosen the windshield upper trim moulding and remove the windshield side trim moulding
3 remove one screw from instrument panel reinforcement and one screw from centre console
4. lift up the instrument panel top pad and disconnect the speaker plug - remove instrument panel and unscrew nuts that secure the speaker to the underside of the instrument panel top pad
this is as per Haynes manual - hope it helps
joanne
It is tight close to the windshield, getting the two screws out. Your socket will not fit. I used a small vice grip to grip the proper socket size and it went well.
The replacement speaker that was recommended to me was the PolkAudio DB461 (4x6). Modern, premium quality/sound for the money.
Lakeside 49