Resizing Photos (in Windows)
(click here to view original thread)
by Adam Wartell
This may be of use to people looking to resize image files for use here on C3VR:
Try this...
If you are using Windows, depending on what version of it you have, you can use "Paint":
* It should be on the Start Menu under Programs/Accessories.
(You can also chose "Run" from the Start Menu, then type in "mspaint" and press enter).
1. Start Paint
2. On the "File" menu, select "Open"
3. Browse to the location of the file you want to resize, and select it by double-clicking it (or click it once, then click the "Open" button).
4. On the "Image" menu, select "Stretch/Skew".
5. In the "Stretch" box, enter 50 for both the Horizontal and Vertical Values. Leave the other values alone, then click "OK"
6. On the "Image" menu, select "Attributes".
7. Make sure that "Pixels" is selected in the "Units" box.
8. Look at the value in the "Width" box. You want it to be between 400 and 500. (And the "Size on Disk" less than 500,000 bytes).
* If the width is still higher than 500, click "Cancel" then go back to step 5 and try again. (You may need to use a number lesser or greater than 50 to get it right. You should get the hang of it pretty quick).
* If the width is between 400 and 500, then click Cancel and go on to step 9.
* If the width is less than 400, you may want to click Cancel, then on the "Edit" menu, select "Undo". Then go back to step 5 and use a number higher than 50.
9. On the "File" menu, select "Save As..." DO NOT SELECT "SAVE" or you will overwrite your original file!!!
10. In the "Save As" box, enter a new file name, make sure the location is correct, make sure the Save As Type is .JPG, then click Save.
If you have "Microsoft Photo Editor", try this:
* You should find it on the Start menu, under Program/Microsoft Office/Microsoft Office Tools.
1. Start Microsoft Photo Editor.
2. On the "File" menu, select "Open"
3. Located the file you want to open, then double-click it (or click it once, then click "Open")
4. On the "Image" menu, select "Resize..."
5. On the Resize box, make sure "Units" is set to "Pixels"
6. Enter 400 in the Width box.
7. Click "OK"
8. On the "File" menu, select "Save As..." (DO NOT SELECT "SAVE" or you will overwrite your original file!!)
9. Enter a name for the file, select a location, , make sure the Save As Type is .JPG, then click "Save".
![](smileys/smiley1.gif)
hth
______________
Joel Adams
C3VR Lifetime Member #56 ![](https://www.c3vr.com/member_pages/4401_4500/4427/vetwave_C3red.gif)
My Link
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"