My speedometer reads 7 MPH fast @ 60 MPH. While I had the pan off to fix a leaky shift shaft I pulled the speedo gear it is 35 tooth with a 15 tooth drive best I can tell. this is a T400 is there a chart that would show from where it is "35 tooth" where I would need to be to get the speedometer right.
I tried the one that uses tire diameter but just a .25 inch difference goes from 35 to 41 tooth that seems like a shot in the dark.
Thanks Mark
Joel Adams
C3VR Lifetime Member #56
My Link
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
Thank you all for your help
All the charts I tried pointed to the 35 tooth which is what I had. So I went with the 2 to 3 mph per tooth and got a 38 tooth and now it's very close 1-2 mph fast but I can live with that.
Thanks again
Mark
Joel Adams
C3VR Lifetime Member #56
My Link
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"