Switching Holes for Tie Rod Ends - Forums - Official C3 Vette Registry

SPONSOR AD

Support our Vendors! | Advertise Here

Topic: Switching Holes for Tie Rod Ends

in Forum: C3 Handling Components

Already a Member?
Login
Not yet a Member?
Register for Free!

Switching Holes for Tie Rod Ends (1/4)
6/2/09 7:09am

bio11
Former Member
Send Private Message

Oklahoma City, OK - USA

Vette(s):
1972 LS5 Convertible,Auto.Targa Blue with Black Interior.

Joined: 4/1/2007
Posts: 432

I noticed this weekend that my tie rod ends are in the front set of holes. I'm wondering if I switch them to the rear set of holes to make steering a little easier since mine is a non-power steering car, will this affect my current alignment. Rebuilding the front suspension and steering is on the horizon, but this could help some for now.

Our Sponsors help support C3VR

Switching Holes for Tie Rod Ends (2/4)
6/2/09 8:09am

MikeMc71
Former Member
Send Private Message

Tucson, AZ - USA

Vette(s):
1970 White L-46 Air Roadster, 1971 White LT1 Coupe, 1971 Red Auto Air Coupe, 383 stroker, 430 HP, 2002 Millennium Yellow Auto Coupe

Joined: 10/7/2007
Posts: 341

One set of holes is used if you have power steering, the other set is used if you don't. I can't remember off the top of my head which ones are which, I believe its spelled out in the AIM.

______________

Switching Holes for Tie Rod Ends (3/4)
6/2/09 10:39am

Adams' Apple

Lifetime Member
Moderator
Send Private Message

Duncanville, TX - USA

Vette(s):
#1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/ Am-Fm/map light National/Regional/Chapter NCRS "Top Flight" #2-1985 Bright Red/Carmine Cp.L-98/auto Member: NCRS, NCRS Texas, Corvette Legends of Texas

Joined: 11/8/2003
Posts: 20207

The front holes are for power steering...they also allow for a faster turning ratio. The rearmost holes are for manual steering, as they give more leverage...
You will need to have the toe set after moving them.

______________

Joel Adams
C3VR Lifetime Member #56
My Link

(click for Texas-sized view!) NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

Switching Holes for Tie Rod Ends (4/4)
6/2/09 12:38pm

dskopp
Limited Member
Send Private Message

Oak Creek, WI - USA

Vette(s):
1981 Great White Shark. Red Interior, 350/190 hp. PS, PB (SS), A/C CC, T-Tops. Served three years in Active Duty Army, then Retired Air Force after 34 years! Badger State Vettes Car Club. 175,000 Original miles!! Now own a 1998 C-5!

Joined: 5/21/2008
Posts: 1965

And be sure not to step on your toes while doing it !!! Rolling On The Floor Laughing

______________

(click to see a larger image)

Our Sponsors help support C3VR